-
·
- Description ·
- Specifications ·
- Accessories ·
- Reviews ·
Description of the DAB Kit Pulsar Dry 30/50 M-NA + Control-D
Brief specifications
- Pump capacity: 4,800 l/h
- Delivery head 42 m / Pressure 4.2 bar
- Switches on/off automatically and with dry-running protection
- Suitable for prolonged use
- Unique: guaranteed to draw clean water from the source
- More specifications
Pros and cons
- Very high quality
- Protected suction, against dirt
- Can run continuously
- Ready-to-use solution
- High operational reliability
- Ideal for rainwater use inside the home and/or for irrigation
- Including built-in dry-running protection and automatic switch-on/off mode
- With baseplate for stable positioning on a surface
The DAB Kit Pulsar Dry 30/50 M-NA + DAB Control-D is a pump kit that can be set up in a clean water source, such as a well, reservoir, collecting tank, or rainwater reservoir. The pump draws in water through the suction connection that is situated on the side of the pump (at the bottom). The provided floating suction set is connected to it, thereby enabling the pump to draw in water as efficiently as possible. By way of several built-in impellers, the water exits the pump through the top outlet, after which it can be transported further. The pump's main feature is that it is so quiet. Since it is placed under water, it can be barely heard on the surface. The provided DAB Control-D should be attached between the pipe/hose outside the water (i.e. on dry land). This device controls the pump. For example, if the pump is connected to an indoor toilet, and one or more applications are opened, the DAN Control-D will start it automatically, instantly supplying water. The pump is fitted with a base plate, ensuring stable positioning on the ground, which can also be secured with screws. This makes it perfect for permanent installations: for example, in a rainwater reservoir from which you want to supply your home with water.
Summary
- Pump is set up in the water and therefore quiet
- Provides sufficient pressure and capacity for about five sprinklers
- The hose that can be used for this pump has a diameter of 1" for the delivery connection and 1" for the suction connection.
- The maximum delivery head is 42 metres, which equals 4.2 bar output
Contents of the kit:
- DAB Pulsar Dry 30/50 M-NA Borehole Pump (with 15m cable)
- DAB Control-D
- Floating suction set
Types of water this product can pump
-
-
- Please note: Only when there is little/no sand/grit in the water
-
- Please note: Only when there is little/no sand/grit in the water
-
-
-
-
-
-
-
-
-
Yield table
-
- 42 meter
-
- 40 meter
- 500 liter p/u
-
- 35 meter
- 2.200 liter p/u
-
- 30 meter
- 3.000 liter p/u
-
- 25 meter
- 3.550 liter p/u
-
- 20 meter
- 4.100 liter p/u
-
- 15 meter
- 4.600 liter p/u
-
- 10 meter
- 4.800 liter p/u
-
- 5 meter
- 4.800 liter p/u
-
- 0 meter
- 4.800 liter p/u
Specifications of the DAB Kit Pulsar Dry 30/50 M-NA + Control-D
General information
-
- DAB Pulsar Dry 30/50 M-NA
- DAB Control-D
- Floating suction set
- Manual
- DAB
- 2 year warranty
- 8059893142122
Physical specifications
- 1,25”
- Stainless Steel
- 20 kg
- 22,4 x 22,4 x 60,3 cm
Technical information
- 230 Volt
- 550 Watt
- 67 - 87 dB
- 0°C – 40°C
- 15 m
Functionalities
- Borehole pump
- Garden irrigation, Rainwater use within / around the house, Water supply for cattle
- 4,800 l/h
- 42 m / max. 4,2 bar output
- Max. 4 pieces
-
-
-
-
Types of water this product can pump
-
-
- Please note: Only when there is little/no sand/grit in the water
-
- Please note: Only when there is little/no sand/grit in the water
-
-
-
-
-
-
-
-
-