-
·
- Description ·
- Similar products ·
- Specifications ·
- Versions ·
- Accessories ·
- Reviews ·
- Frequently asked questions ·
- Manual ·
Description of the DAB JetInox 132 M
Brief specifications
- Pump capacity 4,800 l/h
- Delivery head 48 m / Pressure 4.8 bar
- Suitable for prolonged use and resistant to limescale and rust
- Light, powerful, reliable. Multi-purpose device.
- More specifications
Pros and cons
- Resistant to limescale and rust
- Can run continuously
- Lighter than the cast iron Jet series
- Greater flow rate than the 82 M and 102 M
- Ideal for simple irrigation
- High operational reliability
- No dry-running protection or automatic switch-on/off mode; option in combination with DAB Control-D
The DAB JetInox 132 M Garden Pump is a self-priming water pump of the highest quality; neither effort nor expense were spared in its development. Thanks to the materials used and to the innovative approach, the DAB JetInox is top notch in its class.
This line is used mainly in domestic environments (garden irrigation, washing cars), but also in agriculture, horticulture, and industry. Owing to its well-combined pump capacity and pressure, the DAB JetInox pump is suitable in practically any situation. In addition, the JetInox line's main feature is its stainless steel pump body, making corrosion a thing of the past. An ideal pump for supplying drinking water for your cattle, for example, or for washing your car.
Summary
- Provides sufficient pressure and capacity for an average of five sprinklers
- The hose that can be used for this pump has a diameter of 1" for the delivery connection and 1" for the suction connection.
- Draws water from a maximum depth of eight metres
- The maximum delivery head is 48 metres, which equals a 4.8 bar output
Contents of the kit
- DAB JetInox 132 M Garden Pump
- Manual
Types of water this product can pump
-
-
- in the presence of sand/grit i.c.w. 5' Filter for solids
-
- in the presence of sand/grit i.c.w. 5' Filter for solids
-
- i.c.w. 5' Filter for solids
-
- i.c.w. 5' Filter for solids
-
- i.c.w. 5' Filter for solids
-
- i.c.w. 5' Filter for solids
-
- i.c.w. 5' Filter for solids
-
- i.c.w. 5' Filter for solids
-
-
-
Yield table
-
- 48 meter
-
- 45 meter
- 650 liter p/u
-
- 40 meter
- 1.850 liter p/u
-
- 35 meter
- 3.000 liter p/u
-
- 30 meter
- 4.200 liter p/u
-
- 25 meter
- 4.800 liter p/u
-
- 20 meter
- 4.800 liter p/u
-
- 15 meter
- 4.800 liter p/u
-
- 10 meter
- 4.800 liter p/u
-
- 5 meter
- 4.800 liter p/u
-
- 0 meter
- 4.800 liter p/u
Specifications of the DAB JetInox 132 M
General information
-
- DAB JetInox 132 M Garden Pump
- Manual
- DAB
- 2 year warranty
- 8059893038685
Physical specifications
- 1"
- 1"
- Stainless Steel
- 11 kg
- 42,4 x 17,4 x 19,7 cm
Technical information
- 230 Volt
- 1000 Watt
- > 87 dB
- 35°C
Functionalities
- Garden pump
- Garden irrigation
- 4,800 l/h
- 48 m / Pressure 4.8 bar
- 8 m
- 5+ pieces
-
-
-
-
-
Types of water this product can pump
-
-
- in the presence of sand/grit i.c.w. 5' Filter for solids
-
- in the presence of sand/grit i.c.w. 5' Filter for solids
-
- i.c.w. 5' Filter for solids
-
- i.c.w. 5' Filter for solids
-
- i.c.w. 5' Filter for solids
-
- i.c.w. 5' Filter for solids
-
- i.c.w. 5' Filter for solids
-
- i.c.w. 5' Filter for solids
-
-
-
Versions of the DAB JetInox 132 M
Is this model too weak or too strong? Choose another model from the same series below.
Product | Pumpcapacity | Head | Price |
---|---|---|---|
DAB JetInox 102 M | 3,600 l/h | 54 m / Pressure 5.4 bar | $279.00 |
DAB JetInox 112 M | 3,600 l/h | 62 m / Pressure 6.2 bar | $259.00 |
DAB JetInox 132 M | 4,800 l/h | 48 m / Pressure 4.8 bar | $289.00 |
DAB JetInox 82 M | 3,600 l/h | 47 m / Pressure 4.7 bar | $249.00 |
DAB JetInox 92 M Garden Pump | 4,900 l/h | 37 m / Pressure 3.7 bar | $259.00 |
Accessories of the DAB JetInox 132 M
Reviews of the DAB JetInox 132 M
Solid pump
Great online decision-making support! Pump is exactly what I needed, together with the DAB control. Not difficult to assemble. Option for a corner piece on top of the DAB control would be welcomed.Motor
Great pump but the motor runs quite hot. Can't put my hand on it.Pump kit
Nice kit comprising a suction hose, filter, and pump. The suction hose is firm and the suction filter end looks really sturdy. Filter and pump are easy to assemble. Electric cable was a bit fiddly trying to pull the rubber component through, but some detergent worked wonders. I had a 1" elbow to which I can attach a Gardena connection. It would be handy if you could include this in your product range. A handle, which can be ordered afterwards, is the only thing I miss about this pump. Otherwise, pumps great. Fill the pump with water, fill the filter and suction hose, switch it on and start.DAB JetInox 132M
Speedy and complete delivery. Connect and start spraying. Great!!Kit
The only disadvantage is that DAB supplies this model without an electricity cable. They indicate that it originally was a professional pump that can be used for a wide range of situations. I had already contacted DAB. And that's how I got this pump for my garden. This webshop was recommended to me, so that's where I got the pump from.water pump
Very fast delivery and received everything in good order. Compliments.Kind regards
Freddy
Frequently asked questions of the DAB JetInox 132 M
Frequently asked questions
- What kind of water can I pump with this model?
- What can I use this pump for?
- Is the pump suitable for continuous operation?
- Is it advisable to use a pre-filter?
- How should the pump be installed?
- The water to be drawn in by the pump is situated at a level lower than nine metres. How do I handle this?
- What happens if the water from the source is finished?
- Is the pump suitable for a drinking-water system?
- Can this pump be connected to the existing mains water pipes in my house?
- Is the pump supplied ready to use?
- What items does this kit include?
What kind of water can I pump with this model?
The DAB JetInox 132 M is only suitable to pump clean water, i.e. water that is free from large solid particles (< 2 mm).
This means that you can also pump water from a canal or ditch, but subject to certain conditions:
What can I use this pump for?
This pump is suitable for the following applications:
- Watering, spraying, and irrigating a garden or lawn
- Hosing down a terrace, decking, or garden furniture
- Draining spaces or wells
- Supplying water/rainwater for your washing machine, toilet, sink, or shower in a separate circuit
- Drinking-water systems
Is the pump suitable for continuous operation?
Yes, this pump is perfect for continuous operation.
Is it advisable to use a pre-filter?
If the water is virtually the same as drinking water, no pre-filter is needed.
However, if the water pumped contains solids − for example, water from a ditch or canal − we recommend using a pre-filter.
How should the pump be installed?
The pump and the entire connected system need to be protected against frost and inclement weather conditions.
Therefore, place the pump in a dry location with an ambient temperature from 5°C to 40°C, to allow the motor to cool sufficiently.
The water to be drawn in by the pump is situated at a level lower than nine metres. How do I handle this?
Generally, garden pumps and booster pumps can draw in water from a maximum depth of nine metres.
If the water is occasionally at a depth lower than nine metres, you will need to use a borehole pump, which is placed in the well and usually has a delivery head of 50 metres and over.
Check our range of borehole pumps.
What happens if the water from the source is finished?
This is a water-cooled model pump, which means that it cools itself with the water it pumps.
When the water from the source is finished − for example, if the water level has dropped below nine metres − the pump will keep running with no water supply. This is referred to as 'dry running', and may cause the pump to become overheated, which could ruin it.
You can prevent this from happening by using a dry-running protection system, which ensures that the pump switches off automatically when no water is supplied.
Is the pump suitable for a drinking-water system?
Yes, this pump is made of stainless steel, and is therefore suitable for a drinking-water system.
Can this pump be connected to the existing mains water pipes in my house?
This pump can be connected to your existing water mains water pipes by means of a control system, but we recommend using a booster pump. If you want to optimise your water-supply pressure. Click here for information on how a booster pump works.
Is the pump supplied ready to use?
Click here for available accessories for the DAB JetInox 132 M..
What items does this kit include?
- DAB JetInox 132M
- Manual