-
·
- Description ·
- Similar products ·
- Specifications ·
- Versions ·
- Accessories ·
- Reviews ·
- Frequently asked questions ·
- Manual ·
Description of the DAB Aquajet 82 M
Brief specifications
- Pump capacity: 3,600 l/h
- Delivery head 47 m / Pressure 4.7 bar
- Switches on/off automatically
- Suitable for prolonged use
- More specifications
Pros and cons
- Switches on/off automatically
- Can run continuously
- Very robust (cast iron)
- High operational reliability
- Including tank; handy for supplying a toilet or an irrigation tube
- Not suitable for drinking water
- Heavy weight
The DAB Aquajet 82 M water pressure boosting pump is suitable for increasing pressure in your water pipes, for supplying water (e.g. rainwater for the toilet or for cleaning), or for using water from wells and tanks for irrigation purposes. Thanks to its water tank, the pump does not constantly switch on/off, which means that it is more energy efficient and less power is being used. The pre-assembled pump comes with a 20-litre tank and a pump-connection kit. The pump is ready for immediate use, and, owing to its compact setup, is also suitable for small spaces.
Summary
- Provides sufficient pressure and capacity for about three sprinklers
- The hose that can be used for this pump has a diameter of 1" for the delivery connection and 1" for the suction connection
- Draws water from a maximum depth of 8 metres
- The maximum delivery head is 47 metres, which equals 4.7 bar output
Contents of the kit
- DAB Aquajet 82 M Booster Pump
- Manual
Water tank
This pump is equipped with a water tank, which may be handy in a number of situations; for example, if the pump needs to supply water occasionally (drip watering). In that case, a pump without a tank will start pulsating (continuously switching on and off). A pump that is fitted with a tank can supply water from its tank so that the pump does not need to switch on immediately. Such pumps are very handy to use with, for instance, irrigation tubes and controlled irrigation, or for filling a toilet reservoir, which is usually also a gradual process. A second advantage of a tank is that it greatly reduces water hammer, the hydraulic shock - or ‘blows’ - that water pipes experience if a water supply point is opened hard and fast. Pumps that provide instant high pressure may increase instances of water hammer, and are therefore equipped with a (built-in) tank.
Complete ready-to-use kit
We offer kits for many of our pumps. These are meant mainly to achieve your goal as quickly and efficiently as possible. If you are looking for a replacement pump for an existing situation, you can always opt to get a separate pump, which we offer at a price that is lower than the kit. The kit is made up of accessories that ensure that your product can be used as optimally as possible. Furthermore, with these accessories, our goal is to extend your pump's lifespan so that you can enjoy using it for a much longer period.
DAB
DAB is one of the best-selling brands of water pumps for consumers as well as for professionals. These pumps adhere to a very high standard of quality, with each pump being tested manually by a staff member before it is put on the market. This is the only way DAB can guarantee that you obtain the absolute best. They have a solution regarding almost any situation, whether it involves an industrial application or simply spraying a garden. DAB's professional quality is also reflected in its consumer line. The DAB pumps we replace for people are usually over ten years old.
Automatic activation / deactivation
This pump switches on or off automatically if you open or close a water point that is connected to the pump. In many cases, this feature is a considerable advantage: for example, when irrigating a garden with a hand-held sprayer, or supplying a toilet or washing machine with rainwater. It is also useful if you want to increase the water pressure in your home. Unlike standard garden pumps, booster pumps - because of the difference in pressure - 'notice' when one or more water points are opened or closed. This is how the pump knows that it needs to start or stop. Standard booster pumps (which are mounted to a tank) are equipped with a mechanical switch, and the more advanced ones have electronic switches. Both systems have advantages and disadvantages. The mechanical switch is reliable but can either not be set or it is difficult to do so, while the electronic version can be set but is dependent on electricity.
Types of water this product can pump
-
-
- in the presence of sand/grit i.c.w. 5' Filter for solids
-
- in the presence of sand/grit i.c.w. 5' Filter for solids
-
- i.c.w. 5' Filter for solids
-
- i.c.w. 5' Filter for solids
-
- i.c.w. 5' Filter for solids
-
- i.c.w. 5' Filter for solids
-
- i.c.w. 5' Filter for solids
-
- i.c.w. 5' Filter for solids
-
-
-
Yield table
1"
1"
3
-
- 47 meter
-
- 45 meter
- 100 liter p/u
-
- 40 meter
- 550 liter p/u
-
- 35 meter
- 1.100 liter p/u
-
- 30 meter
- 1.750 liter p/u
-
- 25 meter
- 2.650 liter p/u
-
- 20 meter
- 3.600 liter p/u
-
- 15 meter
- 3.600 liter p/u
-
- 10 meter
- 3.600 liter p/u
-
- 5 meter
- 3.600 liter p/u
-
- 0 meter
- 3.600 liter p/u
Specifications of the DAB Aquajet 82 M
General information
-
- DAB Aquajet 82 M Booster pump
- Manual
- DAB
- 2 year warranty
- 8019203872422
Physical specifications
- 1"
- 1"
- Cast iron pump, pressure vessel with an epoxy layer and stainless steel parts (rustproof)
- 18 kg
- 51 x 30,3 x 48,9 cm
Technical information
- 230 Volt
- 600 Watt
- > 87 dB
- 40°C
- 1,8 m
- H07RN-F
Functionalities
- Booster pump
- Garden irrigation, Rainwater use within / around the house
- 3,600 l/h
- 47 m / Pressure 4.7 bar
- 8 m
- Max. 3 pieces
-
-
-
-
-
Types of water this product can pump
-
-
- in the presence of sand/grit i.c.w. 5' Filter for solids
-
- in the presence of sand/grit i.c.w. 5' Filter for solids
-
- i.c.w. 5' Filter for solids
-
- i.c.w. 5' Filter for solids
-
- i.c.w. 5' Filter for solids
-
- i.c.w. 5' Filter for solids
-
- i.c.w. 5' Filter for solids
-
- i.c.w. 5' Filter for solids
-
-
-
Versions of the DAB Aquajet 82 M
Is this model too weak or too strong? Choose another model from the same series below.
| Product | Pumpcapacity | Head | Price |
|---|---|---|---|
| DAB Aquajet 102 M | 3,600 l/h | 54 m / Pressure 5.4 bar | $349.00 |
| DAB Aquajet 112 M | 3,400 l/h | 62 m / Pressure 6.2 bar | $369.00 |
| DAB Aquajet 132 M | 4,800 l/h | 48 m / Pressure 4.8 bar | $369.00 |
| DAB Aquajet 82 M | 3,600 l/h | 47 m / Pressure 4.7 bar | $269.00 |
| DAB Aquajet 92 M Booster Pump | 4,900 l/h | 37 m / Pressure 3.7 bar | $349.00 |
Accessories of the DAB Aquajet 82 M
Reviews of the DAB Aquajet 82 M
Speedy delivery
Pump has been installed and works fine. Ordered on Friday, delivered and connected on Saturday.Experiences with the dab aquajet 82m booster pump
Efficient delivery, easy to set up, and meets all expectations. All in all, 100% pleased.DAB Aquajet 82 M Booster Pump
Speedy delivery. Pump works well but had to buy a non-return valve because the existing suction pipe did not have a foot valve.Quality product
Speedy and efficient delivery. Booster pump works great. Draining water from a depth of 9 metres is no problem. Minimal noise.Pleased
I have had the pump for a month. Installation was completed quickly. Using it definitely meets all our expectations.Frequently asked questions of the DAB Aquajet 82 M
Frequently asked questions
- What is the advantage of a booster pump versus a garden pump?
- What can I use this pump for?
- Can this pump be connected to the existing mains water pipes in my house?
- What kind of water can I pump with this model?
- Is the pump suitable for continuous operation?
- Is it advisable to use a pre-filter?
- How should the pump be installed?
- The water to be drawn in by the pump is situated at a level lower than nine metres. How do I handle this?
- What happens if the water from the source is finished?
- Is the pump suitable for a drinking-water system?
- Is the pump supplied ready to use?
- What items does this kit include?
What is the advantage of a booster pump versus a garden pump?
A booster pump is essentially a garden pump with a number of extra components, such as:
- An integrated pressure switch, which ensures that the pump switches on or off automatically if water supply is needed.
- A pressure vessel (water tank), which ensures that you instantly have water at your disposal, and the pump does not need to switch on until the water in the pressure vessel starts to run low.
As a result, the booster pump does not need to switch on if only small amounts of water (a few litres) are needed.
First the water from the pressure vessel is used and supplied where it is required.
As soon as the water level in the pressure vessel is about to drop too low, the pump switches on automatically to refill it.
As well as saving energy, the system runs much more quietly, and ensures that you always have water instantly at your disposal.
What can I use this pump for?
This pump is suitable for the following purposes:
- Watering, spraying, and irrigating a garden or lawn
- Hosing down a terrace, decking or garden furniture
- Supplying water/rainwater for your washing machine, toilet, sink, shower, etc.
- Increasing water pressure in your water pipes
Can this pump be connected to the existing mains water pipes in my house?
Yes, this pump can be connected to the existing mains water pipes in your house. However, this is not recommended, because the pump’s high-pressure output is not controllable. For the most suitable system, opt for the DAB e.sybox mini.
What kind of water can I pump with this model?
The DAB Aquajet 82 M is only suitable to pump clean water, i.e. water that is free from very large solid particles (< 2 mm).
This means that you can also pump water from a canal or ditch, but subject to certain conditions:
- We recommend making use of a pre-filter (this allows for extra filtering before the water enters the pump).
In addition, the water should not be colder than 0°C and not warmer than 35°C.
Is the pump suitable for continuous operation?
Yes, this pump is perfect for continuous operation.
Is it advisable to use a pre-filter?
If the water is virtually the same as drinking water, no pre-filter is needed.
However, if the water pumped contains solids - for example, water from a ditch or canal - we recommend using a pre-filter.
How should the pump be installed?
The pump and the entire connected system need to be protected against frost and inclement weather conditions.
Therefore, place the pump in a dry location with an ambient temperature from 5°C to 40°C, to allow the motor to cool sufficiently.
Furthermore, all connected pipes must be absolutely watertight and airtight to prevent damage and loss of performance.
The water to be drawn in by the pump is situated at a level lower than nine metres. How do I handle this?
Generally, garden pumps and booster pumps can draw in water from a maximum depth of nine metres.
If the water is occasionally at a depth lower than nine metres, you will need to use a borehole pump, which is placed in the well and usually has a delivery head of 50 metres and over.
Check our range of borehole pumps.
What happens if the water from the source is finished?
This is a water-cooled model pump, which means that it cools itself with the water it pumps.
When the water from the source is finished - for example, if the water level has dropped below nine metres - the pump will usually keep running with no water supply.
This is referred to as 'dry running' and may cause the pump to become overheated, which could ruin it.
This pump is not fitted with a dry-running protection system, which can be ordered separately. Please refer to the dry-running protection system.
Is the pump suitable for a drinking-water system?
No, the pump is not suitable for a drinking-water system.
Is the pump supplied ready to use?
Yes, you can start using the pump immediately.
Click here for available accessories for the DAB Aquajet 82 M.
What items does this kit include?
- DAB Aquajet 82 M
- Manual
